\(C_1, C_2,\) and \(C_3\) are the Dietz shape factors of three reservoirs with circular, square, and rectangular drainage areas, respectively. The well is located at the geometric center of the reservoir.
Which ONE of the following options is CORRECT about the shape factors?
Show Hint
- \(C_3 < C_2 < C_1\)
- \(C_2 < C_1 < C_3\)
- \(C_1 = C_2 = C_3\)
- \(C_1 = C_2 < C_3\)
The Correct Option is A
Solution and Explanation
Step 1: Concept of Dietz shape factor.
Shape factor accounts for reservoir geometry effect on well productivity index. Higher symmetry (more compact shape) → higher shape factor. Step 2: Order of compactness.
- Circle is most compact, has the highest symmetry → highest shape factor. - Square is less compact than circle → lower than circle. - Rectangle (elongated) is least compact → lowest shape factor. Step 3: Establish order.
Thus, \[ C_{\text{rectangle}} < C_{\text{square}} < C_{\text{circle}}. \] Or, \[ C_3 < C_2 < C_1. \] Final Answer: \[ \boxed{C_3 < C_2 < C_1} \]
Top GATE PE Reservoir Engineering Questions
- Which ONE of the following CANNOT be obtained from pressure transient analysis in well testing?
- \( C_1, C_2, \) and \( C_3 \) are the Dietz shape factors of three reservoirs with circular, square, and rectangular shape of drainage area, respectively. The well is located at the geometric center of the reservoir. Which ONE of the following options is CORRECT about the shape factors?
Four different multilateral well patterns (Forked, Branched, Dual opening and Splayed) are shown in the figure. Which ONE of the following options correctly identifies the multilateral well patterns?
For a hydrocarbon reservoir, the following parameters are used in the general material balance equation (MBE).
The total pore volume (in rb) of the reservoir is:Consider the following diffusivity equation for the radial flow of a fluid in an infinite and homogeneous reservoir. \[ \frac{1}{r} \frac{\partial}{\partial r} \left( r \frac{\partial P}{\partial r} \right) = \frac{1}{\eta} \frac{\partial P}{\partial t} \] where, \( P \) denotes pressure, \( r \) is the radial distance from the center of the wellbore, \( t \) denotes time, and \( \eta \) is the diffusivity constant. The initial pressure of the reservoir is \( P_i \). The condition(s) used in the derivation of analytical solution of the above equation for pressure transient analysis in an infinite acting reservoir is/are:
Top GATE PE Reservoir and channel routing Questions
- Which ONE of the following CANNOT be obtained from pressure transient analysis in well testing?
- \( C_1, C_2, \) and \( C_3 \) are the Dietz shape factors of three reservoirs with circular, square, and rectangular shape of drainage area, respectively. The well is located at the geometric center of the reservoir. Which ONE of the following options is CORRECT about the shape factors?
Four different multilateral well patterns (Forked, Branched, Dual opening and Splayed) are shown in the figure. Which ONE of the following options correctly identifies the multilateral well patterns?
For a hydrocarbon reservoir, the following parameters are used in the general material balance equation (MBE).
The total pore volume (in rb) of the reservoir is:Consider the following diffusivity equation for the radial flow of a fluid in an infinite and homogeneous reservoir. \[ \frac{1}{r} \frac{\partial}{\partial r} \left( r \frac{\partial P}{\partial r} \right) = \frac{1}{\eta} \frac{\partial P}{\partial t} \] where, \( P \) denotes pressure, \( r \) is the radial distance from the center of the wellbore, \( t \) denotes time, and \( \eta \) is the diffusivity constant. The initial pressure of the reservoir is \( P_i \). The condition(s) used in the derivation of analytical solution of the above equation for pressure transient analysis in an infinite acting reservoir is/are:
Top GATE PE Questions
- Four fair coins are tossed simultaneously. The probability that at least one tail turns up is:
- Let \( \vec{A} = 2\ell - \mathbf{j} + \mathbf{k} \) and \( \vec{B} = \ell + \mathbf{f} \), where \( \ell, \mathbf{f}, \) and \( \mathbf{k} \) are unit vectors. The projection of \( \vec{B} \) on \( \vec{A} \) is:
- The value of \( \lim_{x \to \frac{\pi}{2}} \left( \frac{\cos x}{x - \frac{\pi}{2}} \right) \) is:
- Which ONE of the following CANNOT be obtained from pressure transient analysis in well testing?
- The primary objective of the electrostatic grid in electrostatic heater-treater used in crude oil processing is to