Question:
A scanline survey between points A and B of a rock mass is shown. Consider
RQD =100×(0.12+1)×exp(−0.1λ),
where, λ is the frequency of discontinuity per m. The RQD of the rock mass is_____. (round off up to 2 decimals)
A scanline survey between points A and B of a rock mass is shown. Consider
RQD =100×(0.12+1)×exp(−0.1λ),
where, λ is the frequency of discontinuity per m. The RQD of the rock mass is_____. (round off up to 2 decimals)
RQD =100×(0.12+1)×exp(−0.1λ),
where, λ is the frequency of discontinuity per m. The RQD of the rock mass is_____. (round off up to 2 decimals)
Updated On: Jul 18, 2024
Show Solution
Verified By Collegedunia
Correct Answer: 85
Solution and Explanation
The correct answer is: 85.00 or 87.00 (approx)
Was this answer helpful?
0
0
Top GATE MN Mining Geology, Mine Development and Surveying Questions
- A rectangular mine airway of 2.0 m width and 2.5 m height has a bend with deflection of π/4 radian. If the radius of curvature of the bend is 4.0 m, the shock factor of the bend is (round off to three decimals)
- The percentage Fe and corresponding net value for an iron ore mine is given belowAssuming net value versus grade curve to be a straight line, and mining cost of waste is INR 1000 /m3; the correct representation of stripping ratio, SR (m3/tonne) versus Fe (%) grade curve is
Fe (%) Net value (INR per tonne) 58 4000 62 4500 - A rectangular development heading of dimension 3 m x 2.8 m is to be blasted with holes of 2.4 m in length. If the pull factor is 0.95 and swell factor is 1.20, the volume of blasted rock per round, in m3, is_____.(round off up to 2 decimals)
- Water is pumped from a mine sump at the rate of 300 m3/hr to an inverted conical water tank, as shown. The rate of rise in water level in m/min, at the instant water level reaches at 5 m height from bottom of the tank, is____.(round off up to 2 decimals)
- In a tacheometry survey, the readings observed are given.The additive and multiplying constants of the instrument are 0 and 100, respectively. The length of the line AB in m, is____.(round off up to 2 decimals)
Instrument Station Staff Station Bearing of line of sight Vertical angle Staff readings (m) p A 145° +8° 1.2, 1.7, 2.2 B 205° +3° 0.8, 1.2, 1.6
View More Questions
Top GATE MN Mine Surveying Questions
- In a tacheometry survey, the readings observed are given.The additive and multiplying constants of the instrument are 0 and 100, respectively. The length of the line AB in m, is____.(round off up to 2 decimals)
Instrument Station Staff Station Bearing of line of sight Vertical angle Staff readings (m) p A 145° +8° 1.2, 1.7, 2.2 B 205° +3° 0.8, 1.2, 1.6 - A circular curve having a radius of curvature of \(1000\) m is set out by connecting two straights with a deflection angle of \(60^{\circ}\). The apex distance, in \(m\), is . (Rounded off to three decimal places)
Top GATE MN Questions
- Exposure to loud impulsive noise may lead to
- In a self-contained closed-circuit breathing apparatus,
- A rectangular mine airway of 2.0 m width and 2.5 m height has a bend with deflection of π/4 radian. If the radius of curvature of the bend is 4.0 m, the shock factor of the bend is (round off to three decimals)
- In an underground coal mine, two fatalities and three serious bodily injuries occurred during the year 2022. The average daily employment is 1100 and annual working days is 300. The severity index as per DGMS guideline for the mine is
- For a geared engine winding system, the man winding cage is placed at its normal position at pit top of the shaft. As per CMR 2017, the minimum space, in m, between the center of the hole of the detaching hook attached to the rope shackle and detaching belt plate is
View More Questions