Question:
A ring of mass M and radius R is rotating with angular speed ? about a fixed vertical axis passing through its centre O with two point masses each of mass $\frac{M}{8}$ at rest at O. These masses can moveradially outwards along two massless rods fixed on the ring as shown in the figure. At some instant theangular speed of the system is $\frac{8}{9} ?$ and one of the masses is at a distance of $\frac{3}{5} R$ from O. At this instant the distance of the other mass from O is
A ring of mass M and radius R is rotating with angular speed ? about a fixed vertical axis passing through its centre O with two point masses each of mass $\frac{M}{8}$ at rest at O. These masses can moveradially outwards along two massless rods fixed on the ring as shown in the figure. At some instant theangular speed of the system is $\frac{8}{9} ?$ and one of the masses is at a distance of $\frac{3}{5} R$ from O. At this instant the distance of the other mass from O is
Updated On: Jul 14, 2022
- $\frac{2}{3}R$
- $\frac{1}{3}R$
- $\frac{3}{5}R$
- $\frac{4}{5}R$
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
This question is based on angular momentum conservation
As given in the question initial angular velocity of ring is ? and final angular velocity of system is $\frac{8}{9}\omega$
so,
$L_i = L_f$
$I? = L_f$
$I_{ring} \,? = L_f$
$MR^{2} \,\omega = MR^{2} \times \frac{8}{9} \omega + \frac{M}{8} \times \left(\frac{3}{5} R\right)^{2} \times \frac{8}{9}\omega +\frac{M}{8}x^{2} \times \frac{8}{9}\omega$
$R^{2} \times 1 = \frac{8R^{2}}{9} + \frac{1}{8} \times \frac{9}{25} \times \frac{8R^{2}}{9} + \frac{x^{2}}{9}$
$R^{2}\left[1-\frac{8}{9}-\frac{1}{25}\right] = \frac{x^{2}}{9}$
$R^{2} = \left[\frac{25\times9-8\times25-9}{9\times25}\right] = \frac{x^{2}}{9}$
$R^{2} \frac{16}{25} = x^{2}$
$x = \frac{4}{5} R$
So, option (D) is correct
Now we assume ring start to rotate at t = 0 by certain external agent.
Because both rods are frictionless and mass of the particles are equal. At t = 0, both particle starts to move from centre so they will experience same force at all the time. Hence position of particle will be same. If first particle is at a distance $\frac{3}{5}R$ from centre then other will be also at a distance $\frac{3}{5}R$.
So, option (C) is also correct.
Was this answer helpful?
0
0
Top JEE Advanced Physics Questions
- Yellow light is used in a single slit diffraction experiment with slit width of 0.6 mm. If yellow light is replaced by X-rays, then the observed pattern will reveal
- The size of the image of an object, which is at infinity, as formed by a convex lens of focal length 30 cm is 2 cm. If a concave lens of focal length 20 cm is placed between the convex lens and the image at a distance of 26 cm from the convex lens, calculate the new size of the image.
- A concave lens of glass, refractive index 1.5 has both surfaces of same radius of curvature R. On immersion in a medium of refractive index 1.75, it will behave as a
- The position vector $\vec{r}$ of a particle of mass $m$ is given by the following equation $\vec{r}(t)=\alpha t^{3} \hat{i}+\beta t^{2} \hat{j}$ where $\alpha=\frac{10}{3} \,ms ^{-3}, \beta=5\, ms ^{-2}$ and $m =0.1 \,kg$. At $t =1\, s$, which of the following statement (s) is (are) true about the particle?
- In an n-p-n transistor circuit, the collector current is 10 mA. If 90% of the electrons emitted reach the collector
View More Questions
Top JEE Advanced Rotational motion Questions
- At time $t=0$, a disk of radius $1 \,m$ starts to roll without slipping on a horizontal plane with an angular acceleration of $\alpha=\frac{2}{3}\, rad\, s ^{-2}$ A small stone is stuck to the disk At $t=0$, it is at the contact point of the disk and the plane Later, at time $t=\sqrt{\pi} s$, the stone detaches itself and flies off tangentially from the disk The maximum height (in $m$ ) reached by the stone measured from the plane is $\frac{1}{2}+\frac{x}{10}$ The value of $x$ is ___[ [Take $g=10 \,m s ^{-2}$]
- A bar of m = 1.00 kg and length l = 0.20 m is lying on a horizontal frictionless surface. One end of the bar is pivoted so that the bar is free to rotate in the vertical plane. a small m = 0.10 kg is moving on the same horizontal surface with 5.00 ms-1 speed on its path which is perpendicular to the bar. Its hits the bar at a distance \(\frac{L}{2}\) from the pivoted end and return back on the same path with speed v. After this elastic collision, the bar rotates with an angular velocity ω. Which of the following statement is correct?
- A ball is released on a smooth plane as shown. It strikes with the ground, the coefficient of restitution is \(\frac{1}{\sqrt{3}}\) Choose the correct options
- An annular disc of mass M, inner radius a and outer radius b is placed on a horizontal surface with a coefficient of friction μ, as shown in the figure. At some time, an impulse J0 \(\hat{x}\) is applied at a height of h at the center of the disc. If h=hm, then the disc rolls without slipping along the x-axis, which of the following statement is/are correct?
An annular disk of mass 𝑀, inner radius 𝑎 and outer radius 𝑏 is placed on a horizontal surface with coefficient of friction 𝜇, as shown in the figure. At some time, an impulse ℐ0𝑥̂ is applied at a height ℎ above the center of the disk. If ℎ = ℎ𝑚 then the disk rolls without slipping along the 𝑥-axis.Which of the following statement(s) is(are) correct?
View More Questions
Top JEE Advanced Questions
- Yellow light is used in a single slit diffraction experiment with slit width of 0.6 mm. If yellow light is replaced by X-rays, then the observed pattern will reveal
- The size of the image of an object, which is at infinity, as formed by a convex lens of focal length 30 cm is 2 cm. If a concave lens of focal length 20 cm is placed between the convex lens and the image at a distance of 26 cm from the convex lens, calculate the new size of the image.
- A concave lens of glass, refractive index 1.5 has both surfaces of same radius of curvature R. On immersion in a medium of refractive index 1.75, it will behave as a
- The position vector $\vec{r}$ of a particle of mass $m$ is given by the following equation $\vec{r}(t)=\alpha t^{3} \hat{i}+\beta t^{2} \hat{j}$ where $\alpha=\frac{10}{3} \,ms ^{-3}, \beta=5\, ms ^{-2}$ and $m =0.1 \,kg$. At $t =1\, s$, which of the following statement (s) is (are) true about the particle?
- In an n-p-n transistor circuit, the collector current is 10 mA. If 90% of the electrons emitted reach the collector
View More Questions
Concepts Used:
Rotational Motion
Rotational motion can be defined as the motion of an object around a circular path, in a fixed orbit.
Rotational Motion Examples:
The wheel or rotor of a motor, which appears in rotation motion problems, is a common example of the rotational motion of a rigid body.
Other examples:
- Moving by Bus
- Sailing of Boat
- Dog walking
- A person shaking the plant.
- A stone falls straight at the surface of the earth.
- Movement of a coin over a carrom board
Types of Motion involving Rotation:
- Rotation about a fixed axis (Pure rotation)
- Rotation about an axis of rotation (Combined translational and rotational motion)
- Rotation about an axis in the rotation (rotating axis)