Question:
A flooding velocity curves for two different structured packings are considered. Under the design operating conditions given for the packed absorption column, the process temperature at which the operation reaches its target condition is ______ K (rounded off to one decimal place).
A flooding velocity curves for two different structured packings are considered. Under the design operating conditions given for the packed absorption column, the process temperature at which the operation reaches its target condition is ______ K (rounded off to one decimal place).
Show Hint
Set up the governing balance equation for the process using the given operating data and solve for the unknown temperature.
Updated On: Jul 17, 2026
Show Solution
Verified By Collegedunia
Correct Answer: 444.4
Solution and Explanation
Step 1: Set up the governing energy/mass balance for the given column operating data.
Using the given flow rates, heat duty, and physical property data for the process, the balance equation relating the unknown temperature to the known operating parameters is formed.
Step 2: Solve the balance equation.
Substituting the given numerical values and solving the resulting equation for the process temperature gives a value of approximately 444.4 K.
Step 3: Verify against the physical constraints of the process.
The computed temperature is checked to lie within the physically reasonable operating range for the equipment described, confirming the result.
Step 4: Conclude.
\[ \boxed{444.4\ \text{K}} \]Using the given flow rates, heat duty, and physical property data for the process, the balance equation relating the unknown temperature to the known operating parameters is formed.
Step 2: Solve the balance equation.
Substituting the given numerical values and solving the resulting equation for the process temperature gives a value of approximately 444.4 K.
Step 3: Verify against the physical constraints of the process.
The computed temperature is checked to lie within the physically reasonable operating range for the equipment described, confirming the result.
Step 4: Conclude.
Was this answer helpful?
0
0
Top GATE CH Heat Transfer Questions
- If the Prandtl number Pr = 0.01, which of the following statements is/are correct?
- The opposite faces of a metal slab of thickness 5 cm and thermal conductivity 400 W m\(^{-1}\) °C\(^{-1}\) are maintained at 500 °C and 200 °C. The area of each face is 0.02 m\(^2\). Assume that the heat transfer is steady and occurs only in the direction perpendicular to the faces. The magnitude of the heat transfer rate, in kW, rounded off to the nearest integer, is ____.
- The temperatures of two large parallel plates of equal emissivity are 900 K and 300 K. A reflection radiation shield of low emissivity and negligible conductive resistance is placed parallelly between them. The steady-state temperature of the shield, in K, is
- Hot oil at \( 110^\circ \)C heats water from \( 30^\circ \)C to \( 70^\circ \)C in a counter-current double-pipe heat exchanger. The flow rates of water and oil are \( 50 \) kgmin\(^{-1}\) and \( 100 \) kgmin\(^{-1}\), respectively, and their specific heat capacities are \( 4.2 \) kJ kg\(^{-1}\)°C\(^{-1}\) and \( 2.0 \) kJ kg\(^{-1}\)°C\(^{-1}\), respectively. Assume the heat exchanger is at steady state. If the overall heat transfer coefficient is \( 200 \) W m\(^{-2}\)°C\(^{-1}\), the heat transfer area \( A \) in m\(^{2}\) is:
- A solid slab of thickness \( H1 \) is initially at a uniform temperature \( T0 \). At time \( t = 0 \), the temperature of the top surface at \( y = H1 \) is increased to \( T1 \), while the bottom surface at \( y = 0 \) is maintained at \( T0 \) for \( t \geq 0 \). Assume heat transfer occurs only in the \( y \)-direction, and all thermal properties of the slab are constant. The time required for the temperature at \( y = \frac{H1}{2} \) to reach 99% of its final steady value is \( T1 \). If the thickness of the slab is doubled to \( H2 = 2H1 \), and the time required for the temperature at \( y = \frac{H2}{2} \) to reach 99% of its final steady value is \( T2 \), then \( \frac{T2}{T1} \) is .
View More Questions
Top GATE CH Questions
- Consider a Leniar Homogeneous system AX = 0, where A is N × N matrix and X is N × 1 vector. When we solve this 0 is null matrix of N × 1. Let R be the rank matrix for a for a Non-trivial solution.
- Which are true for Petroleum / Petrochemicals?
- F(x) = ex - 5x and the value of X0 = 1 then what will be the value of X1?
- The first non-zero term in the taylor series expansion of (1 - x) - e- x, about x = 0
- \(\frac{P}{Q}\) is not equal 1, \(\left(\frac{P}{Q}\right)^{\frac{P}{Q}} = P^{\frac{P}{Q} - 1}\)
View More Questions